Ferguson is now stocking Friedrich’s equipment at a location near you. Their FRP15AZ Heat Pumps and FRA15AZ Air Conditioners provide more versatile solutions for consistent comfort season after season. Its super-efficient technology lowers energy bills while excellent durability helps keep your mind at ease.

The FRP15AZ heat pump from Friedrich features two speeds (high and low) of cooling and heating, providing more precise temperature control, lower humidity and greater efficiency when compared to single stage compressors. It has a 7mm condenser copper coil which requires less refrigerant allowing for a smaller and lighter footprint while enhancing reliability. This electric heat pump also offers PlusOne Triple Service Access, a 15″ wide, industry leading corner service access, two fastener, removeable corner and individual louver panels – makes repairs easier and faster.

• Cooling efficiency: 16 SEER2/11.7 EER2
• Heating efficiency: 8.1 HSPF2
• Nominal sizes: 1.5 to 5 Tons [5.3 to 17.6 kW]
• Cooling capacities: 13.36 to 45.6 kBTU
• 10-year warranty

Plus these heat pumps are eligible for the Energy Efficient Home Improvement Federal Tax Credit (Tax Section 25C).

As part of the Inflation Reduction Act of 2022 and effective back on January 1, 2023, the Energy Efficient Home Improvement Federal Tax Credit (EEHI) offers homeowners replacing their heating and cooling systems with a high efficiency CEE heat pump system to qualify for up to $2,000 in federal tax credits.

The FRA15AZ air conditioner from Friedrich features inverter operation from 45 to 100% capacity with the EcoNet® Smart Thermostat. Download the Rheem Contractor & EcoNet® apps, for built-in technology makes advanced set-up, monitoring, troubleshooting and repairing the product easier than ever before. It has a 7mm condenser copper coil which requires less refrigerant allowing for a smaller and lighter footprint while enhancing reliability. This unit also offers PlusOne® for expanded v 3 in. – 4 in. – 5 in. service valve space, providing a minimum working area of 27 square inches and triple service access of 15 inches leading the industry in corner service access/

• Cooling efficiency: 15.2 SEER2/9.8 EER2
• Nominal sizes: 2 to 5 Ton [7.0 to 17.6 kW]
• Cooling capacities: 17.1 to 55.5 kBTU [5.0 to 16.3 kW]
• 10-year warranty

---

Installation Technician Program – Scheduled 2024 Spring 

Cost: $0 

Target Audience: This program is intended for installation technicians.

This program is designed to help Installation Technicians develop key skills needed to reduce callbacks and improve first-time installation success. We will tackle the fundamental installation practices such as brazing, wiring, configuration, and proper commissioning procedures for refrigeration and furnace operation. We will also tailor our weekly virtual sessions based on the feedback you provide.

As part of this program, you will have weekly assignments. These assignments may include:

• Videos
• Discussion questions
• Live Virtual Sessions

Click here to enroll now!

Reversing Valve Operation & Troubleshooting

In this video, you will understand how a reversing valve normally operates and be able to demonstrate troubleshooting steps when the valve is not operating properly.

Click here to watch this training video.

Ice Banding

In this video, you will learn what can cause ice banding and determine if banding is caused by a component issue, a refrigerant flow issue or an application issue; then determine the best strategy to resolve the ice banding problem.

Click here to watch this training video.

---

THE RIGHT PRODUCT FOR ANY PROJECT

Mitsubishi Electric Trane HVAC US (METUS) is a leading provider of ductless systems in the United States. With unmatched energy efficiency, performance and control, it’s never been easier to make any home, any building, anywhere more comfortable and energy efficient.

Save energy and maximize savings by creating your customized comfort zones. With Mitsubishi’s technology, units use the exact amount of energy needed to heat or cool an area, making our systems up to 40% more efficient than traditional alternatives.

P-SERIES: Designed to meet the needs of light commercial and residential applications, these single-zone systems are perfectly suited for mechanical/electrical areas where critical cooling is needed. Models are available from 12,000 to 42,000 BTU/H.

M-Series: Mini- and multi-split systems perfect for room remodels or whole-home projects. Models are available from 9,000 to 60,000 BTU/H.

HOW TO INSTALL A BAYCON103 ECONOMIZER INTO A 2-TO-T-TON I2 PACKAGES UNIT.

Click here to be shown how the installation of a BAYCON1-3 economizer into a 2-to-5ton I2 WCZ, YCZ AND DCZ packaged units.

HOW TO PERFORM A QUICK GO & NO GO TEST FOR MADULATING GAS HEAT COMPONENTS.

Click here to learn the basic operation and test procedure of modulation CFM and CFMB (Combustion Fan Motor Board).

HOW TO TROUBLESHOOT A EG COMMUNICATION ERROR

Click here for step by step troubleshooting steps to determine the root cause of communication alerts between the outdoor and indoor units.

Keeping your customer’s home at a comfortable temperature can be expensive. A typical household’s energy bill is around $1,900 annually, and almost half of that goes to heating and cooling! So making smart decisions about a home’s heating, ventilating, and air conditioning system can have a big effect on utility bills — and comfort.

Replacing your old heating and cooling equipment with new, energy-efficient models is a great start. But to make sure that you get the best performance, the new equipment must be properly installed. In fact, improper installation can reduce system efficiency by up to 30 percent – costing you more on your utility bills and possibly shortening the equipment’s life.

Boilers

ENERGY STAR certified boilers have annual fuel utilization efficiency (AFUE) ratings of 87% or greater for oil boilers and 90% or greater for gas boilers. AFUE is the measure of heating equipment efficiency. They achieve greater efficiency with features, including:

• Electronic ignition, which eliminates the need to have the pilot light burning all the time
• New combustion technologies that extract more heat from the same amount of fuel
• Sealed combustion that uses outside air to fuel the burner, reducing drafts and improving safety

An ENERGY STAR certified gas boiler can save about $780 over the lifetime of the product, while an ENERGY STAR certified oil boiler can save $420 over its lifetime.

Keeping your customer’s home at a comfortable temperature can be expensive. A typical household’s energy bill is around $1,900 annually, and almost half of that goes to heating and cooling! So making smart decisions about a home’s heating, ventilating, and air conditioning system can have a big effect on utility bills — and comfort.

Replacing your old heating and cooling equipment with new, energy-efficient models is a great start. But to make sure that you get the best performance, the new equipment must be properly installed. In fact, improper installation can reduce system efficiency by up to 30 percent – costing you more on your utility bills and possibly shortening the equipment’s life.

Air Source Heat Pumps (ASHP)

An air source heat pump (ASHP) can be installed and connected to the conventional forced-air ductwork system that is typical of most American homes. ASHPs that earn the ENERGY STAR label are independently certified to save energy, save money, and protect the climate. Electric ASHPs use the difference between outdoor air temperatures and indoor air temperatures to cool and heat your home. Because heat pumps move heat rather than converting it from fuel, as combustion heating systems do, an ASHP is so efficient that it can deliver up to three times more heat energy to a home than the electrical energy it consumes. ASHPs are also a smart investment year-round, as heat pumps serve double duty by also providing cooling in the summer months.

An ENERGY STAR certified ASHP provides highly efficient heating and cooling by extracting heat from outside into the home in the winter and pulling the heat out of your home in the summer. They also:

• Lower energy bills by switching from electric resistance, propane, and oil to heat pumps.
• No combustion means better indoor air quality because there are no direct emissions such as NOx, carbon dioxide, or carbon monoxide.
• No fuel storage or risk of running out of fuel.

Air source heat pumps that earn the ENERGY STAR are eligible for a federal tax credit up to $2,000. This tax credit is effective for products purchased and installed between January 1, 2023, and December 31, 2032. Click here to learn more about the Inflation Reduction Act.

Furnaces

Different gas furnace efficiency requirements and labels are used for different regions of the country.

• Certified gas furnaces in the southern half of the U.S., where homes require less heat, will be labeled with a unique “U.S. South” ENERGY STAR logo. These furnaces will be up to 11% more efficient than standard models and can save an average of $30 in energy costs each year.
   
• Certified gas furnaces in the northern half of the U.S. will be labeled with the standard ENERGY STAR logo. These furnaces will be up to 15% more energy efficient than baseline models and can save $80 a year, in energy costs.

• Certified oil furnaces are up to 4% more energy efficient than baseline models and can save about $70 in energy costs per year.

Meet the T10+ Smart Thermostat Kit with RedLINK® 3.0

The new T10+ Smart Thermostat Kit with RedLINK 3.0 offers humidification, dehumidification and ventilation control —
giving you a customizable solution for each customer from a single device without running new wires. Homeowners benefit from the latest in smart thermostat technology, and you enjoy a simple setup with benefits extending beyond installation.

T10+ Smart Thermostat Kit Product Features

• ENERGY STAR® certified. Only smart thermostats that earn the ENERGY STAR label have been independently certified, based on actual field data, to deliver energy savings
• Prioritizes room off time-based scheduling, motion detection or geofencing — giving customers ultimate flexibility for optimal control
• EIM included in the kit makes upgrading to a multi-stage or heat pump quick and easy
• Smart lockouts (such as ventilation lockout) can be activated on high- or low-temperature days or when the outdoor dew point is high
• Can be used with a floor/slab sensor to control the ambient air temperature, floor temperature or both
• Dry contact alerts, including water leak and full drain pan alert, with the option to shut off the system when drain pan is full

RedLINK 3.0 Room Sensor Product Features

• The T10+ Smart Thermostat communicates with RedLINK Room Sensors via RedLINK 3.0 wireless technology, helping ensure a strong, uninterrupted connection between devices
• Homeowners can set a schedule or let the sensors respond to their lifestyle
• RedLINK 3.0 sensors feature a 200-ft range from the thermostat to the sensor, which is greater than the advertised range of other sensors
• Powerful RedLINK wireless signal is designed to transmit reliably through most building materials

As part of the launch of the T10+, Resideo is phasing out T10 thermostats from their inventory. The T10 thermostat models will be available while supplies last.

HOW TO TEST A PRESSURE SWITCH ON A TRANE FURNACE

Click here to determine at what negative pressure the switch will close in order to perform diagnostic testing of the vent pressure switch circuit.

HOW TO SET GAS PRESSURE ON A MODULATING TRANE FURNACE

Click here to learn the process for setting the gas valve on Trane’s modulating furnace, for both the TUHM and the AUHM furnace platforms.

S9 FURNACE – E3.4 HIGH STAGE PRESSURE SWITCH ERROR TROUBLESHOOTING

Click here to gain an understanding of pressure switch characteristics, how to check for proper switch operation and common issues as to why a switch may not close to allow high stage operation.

Carbon monoxide (CO) is a colorless, odorless gas that can be produced by malfunctioning or improperly maintained heating systems, including furnaces and boilers. It’s important to note that CO concerns are related to heating systems rather than air conditioning, so ensuring proper maintenance of heating systems, including regular inspections and maintenance checks, is crucial to prevent the risk of carbon monoxide leaks. If your clients have concerns about carbon monoxide or heating system maintenance, it’s advisable to address these issues promptly and provide appropriate guidance to ensure their safety.

Safeguarding your home from this hidden danger requires a comprehensive understanding of how to detect carbon monoxide leaks. Learn the top 7 effective ways to identify and prevent CO leaks, empowering you with the knowledge to ensure a secure and serene living environment for your customers.

1. Install Carbon Monoxide Detectors: Early Alert System

Carbon monoxide detectors act as a sentinel, constantly monitoring your indoor air for dangerous levels of CO. Strategically placing these detectors in key areas, such as bedrooms and hallways, ensures that you’ll be promptly alerted if CO concentrations rise to hazardous levels.

Find the carbon monoxide detector that best fits your customer’s needs.

2. Prioritize Regular AC System Inspections: Professional Oversight

While your customers may be vigilant about cleaning or changing their air filters, annual inspections will delve into the intricate components of your system, catching potential issues before they escalate and lead to CO leaks.

3. Monitor Flame Color in Furnaces: Visual Clues

If the AC system relies on a furnace, become a flame watcher. A consistent blue flame indicates proper combustion, but a yellow or orange flame is a sign of incomplete combustion, which can produce CO.

4. Thoroughly Check for Visible Rust or Corrosion: Visual and Structural Inspection

Deterioration in the AC system, especially in exhaust and ventilation components, can be a pathway for CO to enter the home. Regularly inspect these parts for signs of rust or corrosion, addressing any concerns promptly.

5. Recognize and Respond to Physical Symptoms: Personal Vigilance

Carbon monoxide poisoning often starts with vague symptoms like headaches, dizziness, or nausea. If these symptoms occur regularly, particularly when you’re at home, consider the possibility of CO exposure and take swift action.

6. Ensure Adequate Ventilation: The Importance of Airflow

Proper ventilation is a powerful defense. Blocked vents can cause CO to accumulate indoors. Regularly check and clean vents, ensuring that gases are effectively directed outside your living spaces.

7. Educate Yourself and Your Household: Knowledge is Safety

Educating your family about carbon monoxide risks and detection methods empowers everyone to respond effectively. Create an emergency plan that includes knowing how to evacuate, seeking medical attention, and contacting professionals.

Air conditioners themselves do not produce carbon monoxide (CO) but, it’s important to note that if the HVAC system includes a furnace, it could potentially produce carbon monoxide. Regular maintenance and proper ventilation of all fuel-burning appliances are essential to prevent carbon monoxide leaks and ensure the safety of the home.

Our Madison Ferguson location has outgrown our current facility. We are excited to officially announce the transition of our office, warehouse, counter and Hot Water Products to our new location on Monday, November 6^th, 2023. 

This move raises our square footage from 38,000 to more than 150,000! The expansion brings significant amounts of inventory forward to service you today. We are expanding our offerings to dual trade and HVAC customers, adding in HVAC to better support your needs.

Major upgrades to the new building, include:

• Outdoor lockers for 24/7 pickup. No more rushing to pick up material left outside after normal business hours.  Our new locker system will allow you to pick material up on your own time while giving you peace of mind that your material is secure.
• Dedicated will call counter. Avoid waiting in line with customers ordering at the pick-up counter. Orders submitted, we will have them ready in 1 hour or less!
• Large training room. We will have a 48-person training room to hold CEUs and local trade association meetings.  Partner with us to help with your trainings! Please do not hesitate to reach out to Adam Chew at adam.chew@ferguson.com or 608-438-6675 or your sales associate.
• Indoor pipeyard. All of our pipe will now be stored indoors. Clean storage of pipes will help support the cleanliness of installs in a temperature-controlled and UV-protected environment.
• Indoor pipe loading. We will have the ability for our customers to pull right inside our warehouse to load. No more worrying about strapping pipe down in inclement weather, or slips, trips, and falls in icy conditions.

Our showroom will remain at our current location at 4505 Triangle Street in McFarland. They will be joining us at the new location within the next year, as we build out the brand new showroom in our new building. The new showroom will be a flagship facility in the state. This will raise the square footage from 2,500 to 12,500. More to come on that exciting news in the coming year!